Custom Manufacturers

The following custom OEM manufacturers are known leaders in their respective industries.  They are financially secure and fully staffed with tooling and design engineers.


Click to Visit Atlantic Manufacturing's Web Site

Atlantic Manufacturing LLC - Waterbury, CT

Deep Draw Process

Manufacturer of Small Custom Formed & Drawn Metal Products & Eyelets for the Automotive, Electronics, Medical and Consumer Good industries.  Atlantic can form a wide variety of raw materials including, but not limited to:  Aluminum, Brass, Copper, Cupro Nickel, E-Brite, Inconel 600, Invar 36, Kovar, Molybdenum, Monel, Nickel and Nickel Iron Alloys, Niobium, Steel, Stainless Steel, Tantalum, Tungsten or Zinc.

QS-9000 Certified.


Click to Visit Bison Stainless Tube's Web Site

Bison Stainless Tube - Freeport, TX
Distributors of Small Diameter Tubing; Custom & Stock-Stainless Steel & Other Metals; Hypodermic, Medical Quality (Tight ID Tolerances), Pipe, Fractional, Metric, Round, Shaped, Composites, Drawing, Straightening, Cleaning/Annealing; Burr-Free Cutting & Deburring.


Click to Visit Boker's, Inc.'s Web Site

Boker's, Inc. - Minneapolis, MN

Since 1919, Stampings In All Metals, Weldments, Sheet Metal Assemblies Chassis For Electronic Equipment; Contract Manufacturing. Small & Large Lots. Blanking, Forming, Piercing. Make Tools & Dies. Special & Odd-Size Washers In All Materials.

ISO 9001:2000 Registered.



Click to Visit Medelec's Web Site

Medelec SA - Puidoux, Switzerland
Manufacturers since 1952 of customized precision platinum markerbands.  From prototype to production with no limitations on quantity.  Wall sizes up to 0.015 mm (0.0006"), Exterior diameter from 0.1 mm (0.004") up to 0.10 mm (0.04"), Ra > 0.1 (Rms > 4) - Wide choice of metals.

ISO 9001:2000 Certified


Click to Visit Motion Dynamics' Web Site

Motion Dynamics Corporation - Muskegon, MI
Specializing in the custom production of high precision, tight tolerance spring & wire components.  We use all types & shapes of material, including coated materials.   Wire Diameters:  Spring and coils:  0.001" to 0.100"; Wire forms:  0.001" to 0.075".  We have worked hard to develop some of the finest fine wire-forming & spring making services in the world.

ISO 9001:2000 Certified.


Click to Visit Ni-Ti Tubes' Web Site

Ni-Ti Tubes LLC - Santa Clara, CA

 

High precision nitinol tubing manufacturer since 2004.  Services include consulting, ni-ti metallography test laboratory, macroetching, AF testing (confirms the austenite finish of the stent or tube), grain size determination (using ASTM E112), surface and tensile evaluations.

ISO Certification in process.


Click to Visit Optinova's Web Site

Optinova AB - Godby, Finland

Manufacturer of IV Catheters and small sized fluoroplastic tubing since 1971, offered in most materials such as fluoropolymers, Polyolefines, Polyurethane in heatshrink, braided, welded, co-extruded, radio opaque, and encapsulated stripes in tubing or profiles as well as dispersion coating of wire.  Capable of multi-layered designs, where combinations of different resin may add to product performance.

ISO 9002 Certified.


Click to Visit Radcliff Wire's Web Site

Radcliff Wire Inc. - Bristol, CT
Starting out in 1959 supplying spring manufacturers with flat, square, and special-shaped wire, Radcliff Wire is now known the world over as a major wire supplier to many different industries.  These industries include telecommunications, aerospace, electronics, automotive, computer and consumer products, to name a few.  Radcliff Wire offers hot tin dipped wire as well as most types of plating and coatings.  Straightened and cut-to-length wire is also available.  Available in forty different metals and alloys. 

ISO 9001-2000 and ANSI/ISO/ASQ Q9001:2000 Certified.


Click to Visit Reliance Laser's Web Site

Reliance Laser LLC - Agawam, MA

 

Laser welding, cutting, and marking.

Small sizes and tight tolerances. Let Reliance take you from concept to prototype, then process validation, and into high volume production.


Click to Visit RiverTech Medical's Web Site

RiverTech Medical - Chattanooga, TN

 

Experienced manufacturer of thin walled polyimide tubing.

Sizes:

ID Range: .005” - .0965”
Wall Thickness Range: .0005” - .010”
Standard “Gauge” Sizes

Braided polyimide with Pebax, Tecoflex and Nylon outer layers, and composite tubing.  

Precision wire coatings.  Capability to insulate any wire material with polyimide to give high dielectric strength with precision tolerances.. 

Copper or silver plated copper wire drawing to your unique specifications.  Sizes: .005” to .100”.

ISO 9001:2000 certified.


Click to Visit Swisstronics' Web Site

Swisstronics, Inc. - Watertown, MA & Loudon, TN

 

Specializes in High Volume Turned Metal Parts & Custom Screw Machine Products.  Research and Development and its prototyping at the same location.  With over 100 Escomatics - running 24 hours-a-day, 7 days-a-week.  More intricate parts can also be manufactured on our 17 CNC-type equipment, offering XYZ axis capability, four spindle back attachment, and C-axis control.  Parts can be produced in any shape or size ranging from 0.100 inches to 1.25 inches (32 millimeters).  Any profile material including hexagons, octagons, squares, rectangles, and triangles.  A wide range of materials include: any of the 300 series stainless steels, titanium, beryllium and tellurium copper, OFHC copper, aluminum, phosphor bronze, and exotic and standard materials.

ISO/TS16949:2002 Certified.


Click to Visit Texloc's Web Site

Texloc Ltd. - Fort Worth, TX
Manufacturer of Fluoroplastics, PTFE, FEP, PFA, ETFE, Tubing Rod & Shapes, Heat Shrinkable, Medical Tubing & Splines For The Aerospace, Automotive, Chemical, Electrical, Food Handling & Medical Industries. Convoluted Aircraft Conduit, Convoluted Fluid Handling Tubing.

ISO 9001 Certified.


Click to Visit Tru Tech Systems' Web Site

TRU TECH Systems - Mt. Clemens, MI
TRU TECH Systems has been providing the finest in high precision grinding services since 1989.  Grinding forms, O.D./I.D., centerless grinding, profile/taper grinding, plunge and micro grinding.  

TRU TECH also manufactures high precision CNC grinding machines.  The TRU TECH unit provides standard repeatability which is guaranteed within 30 millionths of an inch, and an optional super-precision model guaranteed within 5 to 10 millionths.  Combined with CNC Pick-N-Place Talking Software developed in-house, the TRU TECH 3-Axis CNC Precision Grinding Machine is not only the most user-friendly machine around, but also the most accurate! 

ISO 9001:2000 Certified.